McLaren 600LT Exhaust System 13HA055RP

The McLaren 600LT exhaust system 13HA055RP is an OEM exhaust assembly designed for the McLaren 600LT. Current parts listings identify 13HA055RP as a McLaren 600LT exhaust system, with listings specifically describing it as an OEM valved exhaust. The 600LT uses a distinctive top-exit exhaust configuration, making the correct exhaust assembly particularly important when replacing a damaged or missing original system.

Product Specifications

Product Overview

The 13HA055RP McLaren 600LT exhaust system is part of the car’s rear exhaust assembly and is associated with the 600LT’s characteristic top-exit exhaust layout. Current listings specifically identify the reference with the 600LT and describe it as an OEM valved exhaust system.

The 600LT exhaust configuration differs by market and specification. The standard UK/EU configuration is associated with a valved system, while the separate 13HA044RP reference is documented as the non-valved MSO/US-spec exhaust. Therefore, 13HA055RP should not be confused with 13HA044RP when determining the correct replacement.

McLaren 600LT Compatibility

The 13HA055RP part number is currently listed specifically for the McLaren 600LT. Recent marketplace listings identify it as an original used 600LT exhaust assembly, while another listing explicitly describes 13HA055RP as an OEM valved exhaust.

The McLaren 600LT was produced with different exhaust configurations depending on market and specification, so buyers should compare the original part number, exhaust configuration and vehicle VIN before ordering.

Exhaust Design and Application

The 600LT’s exhaust exits through the upper rear section of the vehicle rather than using a conventional low-mounted rear exhaust arrangement. Installation documentation for 600LT exhaust systems shows removal of the engine cover, exhaust heat protection and muffler-related components during exhaust replacement.

For a replacement 13HA055RP, the exhaust should be checked for correct mounting points, valve operation, heat-shield interfaces and alignment with the top-exit exhaust openings before final installation.

Replacement and Restoration Use

This OEM exhaust assembly can be suitable for:

• McLaren 600LT exhaust replacement
• Accident-damaged exhaust restoration
• Replacement of a damaged original exhaust
• Restoration of an OEM 600LT configuration
• Replacement of exhaust components affected by heat or impact
• McLaren 600LT repair projects

When purchasing a used exhaust, inspect the welds, pipes, mounting brackets, exhaust outlets and valve mechanism for cracks, dents, deformation or excessive heat-cycle damage.

Part Number Verification

Primary part number: 13HA055RP

Do not confuse this reference with 13HA044RP, which current McLaren 600LT sources identify with the separate non-valved MSO/US-spec exhaust configuration.

Always compare the number on the existing exhaust and confirm the vehicle VIN, model year and market specification before ordering.

Short Description

• McLaren 600LT OEM exhaust system
• Part number 13HA055RP
• Valved exhaust configuration
• Designed for the McLaren 600LT
• Distinctive top-exit exhaust application
• Suitable for replacement and restoration
• Check valve mechanism and mounting points before installation
• Verify VIN and original exhaust part number before purchase