Lamborghini Aventador S LP740 Gearbox Clutch

The Lamborghini Aventador S LP740 gearbox clutch is a high-performance transmission component designed for the Aventador S’s 7-speed ISR automated manual gearbox. The Aventador S uses a dry double-plate clutch with a 235 mm diameter, engineered to handle the output of Lamborghini’s naturally aspirated V12 powertrain.

Lamborghini parts catalogues identify 07M105269D as the clutch with flywheel assembly for the Aventador S, with the reference appearing in 2018 and 2021 LP740-4 S Coupe catalogues.

Product Specifications

Product Overview

The 07M105269D clutch assembly is a key component of the Aventador S transmission system. It transfers engine torque into the ISR gearbox and is designed around the Aventador S’s dry twin-plate clutch configuration.

Current Lamborghini parts catalogue information lists 07M105269D as “clutch with flywheel” and identifies it for the Aventador and related Lamborghini applications. A current specialist listing also shows the part taken from a 2018 LP740-4 S Coupe, further supporting its Aventador S application.

Gearbox & Clutch Configuration

The Aventador S LP740-4 uses a 7-speed ISR transmission with automated manual transmission operation. Unlike a conventional torque-converter automatic gearbox, the clutch is responsible for engaging and disengaging the engine from the transmission during gear changes.

The factory specification identifies the clutch as:

• Dry clutch
• Double-plate design
• 235 mm diameter
• Used with the 7-speed ISR transmission

OEM Part Number

07M105269D

This is the principal OEM reference identified for the Aventador S clutch-with-flywheel assembly. Lamborghini catalogues show the same reference in different LP740-4 S model-year diagrams, including 2018 and 2021.

The complete clutch assembly should not be confused with individual gearbox components, bell-housing parts or hydraulic control components listed separately in the Aventador transmission catalogue.

Compatibility

The part is documented for Lamborghini Aventador LP740-4 S applications. The reference is also catalogued for other Aventador-family applications, so the VIN and existing clutch part number should be checked before ordering.

Compatibility should be confirmed based on:

• Aventador model and variant
• Model year
• Coupe or Roadster configuration
• Existing clutch/flywheel reference
• VIN
• Transmission specification

Replacement & Repair

A replacement clutch assembly may be required when the original clutch has reached the end of its service life or has suffered excessive wear, slipping, overheating or other transmission-related problems.

Because the Aventador S uses an automated manual ISR transmission, clutch replacement should be carried out by a technician familiar with Lamborghini’s transmission and clutch-control systems.

After installation, the clutch system may require appropriate calibration or adaptation procedures using suitable diagnostic equipment.

Condition

The exact condition of the clutch should be confirmed from the individual item being sold.

For a used clutch assembly, inspect the friction surfaces, pressure plate, flywheel surface and associated components for evidence of excessive wear, overheating or previous damage. Do not assume that additional clutch hardware is included unless specifically stated.

Buyer Verification

Before ordering, confirm:

• Lamborghini Aventador S LP740-4
• OEM part number 07M105269D
• Dry twin-plate clutch configuration
• 235 mm specification
• Clutch-with-flywheel assembly
• Coupe or Roadster application
• Exact condition
• Included components
• VIN compatibility

Short Description

• Lamborghini Aventador S LP740-4 gearbox clutch
• OEM reference 07M105269D
• Clutch with flywheel assembly
• Dry double-plate clutch
• 235 mm clutch specification
• Designed for the Aventador S 7-speed ISR gearbox
• Suitable for transmission repair or replacement
• Professional installation recommended
• Verify VIN and clutch specification before ordering