Aston Martin DBS Superleggera Front Hood Bonnet

Replace or restore the front bodywork of your Aston Martin DBS Superleggera with this OEM-specification front hood/bonnet designed for the high-performance DBS Superleggera AM7 platform. The bonnet is a major structural and styling component of the front bodywork, incorporating the distinctive sculpted profile and provisions for the DBS Superleggera’s bonnet ventilation system.

Aston Martin DBS Superleggera Front Hood Bonnet

The DBS Superleggera was produced as part of Aston Martin’s modern DBS range, with genuine replacement bonnet components and dedicated bonnet vents catalogued for 2018–2024 DBS Superleggera models.

Product Specifications

Aston Martin DBS Superleggera Hood

The DBS Superleggera bonnet is one of the most recognizable exterior components of the vehicle. Its sculpted design complements the wide front wings, grille and front-end aerodynamic package while providing the necessary clearance and mounting provisions for the engine compartment.

Aston Martin’s parts catalogue specifically separates the DBS Superleggera bonnet from other body components and includes a dedicated Bonnet – DBS catalogue section.

This makes the bonnet suitable for professional replacement following collision damage, panel deformation or restoration work.

Designed for the DBS Superleggera AM7

This bonnet is intended for the 2018–2024 Aston Martin DBS Superleggera generation. Genuine Aston Martin replacement components for the DBS Superleggera are catalogued specifically against this model range.

The bonnet should be matched to the vehicle’s VIN and existing OEM reference before purchase because Aston Martin used different specifications and component references across production configurations.

Bonnet Vent Integration

The DBS Superleggera features distinctive bonnet ventilation. Genuine Aston Martin parts listings identify dedicated carbon bonnet vents for the DBS Superleggera, including left- and right-hand components. For example, the genuine right-side carbon bonnet vent is listed under part number KY73-16C693-BB, while another carbon bonnet vent is listed under KY73-16C693-CA.

The exact vents, mesh panels, grilles and trim supplied with the bonnet should therefore be confirmed before purchase.

Carbon Fibre Bonnet Options

Carbon-fibre bonnet configurations are available for the DBS Superleggera. Current specialist listings identify a 2022 DBS Superleggera carbon front hood as a genuine OEM part, supplied in primed condition.

This listing should not automatically be assumed to be a carbon-fibre bonnet unless the supplied item is specifically identified as carbon. Material and specification should be confirmed from the actual part.

Suitable for Accident Repair

A replacement DBS Superleggera bonnet can be used for a variety of professional repair applications, including:

• Front-end collision repair
• Replacement of a deformed bonnet
• Damaged panel replacement
• Aston Martin restoration
• Body-shop repair
• Salvage vehicle rebuilding
• Cosmetic refurbishment
• OEM restoration projects

The replacement panel can help restore the original front-end profile when the existing bonnet is beyond economical repair.

Bonnet Hardware

The bonnet works together with several supporting components. Depending on the exact vehicle specification, these can include:

• Bonnet hinges
• Gas struts
• Bonnet latch
• Safety catch
• Bonnet vents
• Vent mesh
• Insulation
• Under-bonnet trim
• Fasteners
• Mounting hardware

These components should not be assumed to be included unless specifically stated in the product listing.

Aston Martin parts catalogues separately identify bonnet-related hardware such as hinges, gas springs and hood support components on other DBS applications, illustrating that these items can be supplied separately from the bonnet panel.

Condition and Finish

The condition of the specific bonnet should be confirmed from the actual item and photographs.

For a used bonnet, inspect:

• Outer panel surface
• Leading edge
• Rear bonnet edge
• Vent openings
• Hinge mounting points
• Latch area
• Underside
• Carbon-fibre surface, where applicable
• Previous repairs
• Dents and scratches
• Paint condition
• Signs of structural damage

If supplied in primer or a different exterior color, professional preparation and painting may be required.

Professional Installation

Professional installation is recommended because correct bonnet alignment is important for maintaining consistent panel gaps and proper operation.

After installation, the bonnet hinges, gas struts, latch and safety catch should be checked. The bonnet should open and close smoothly and securely before the vehicle is returned to service.

VIN and Part Number Verification

Before purchasing an Aston Martin DBS Superleggera hood, verify:

1. Vehicle model — DBS Superleggera.
2. Model year.
3. VIN.
4. Complete bonnet part number.
5. Coupe specification.
6. Standard or carbon-fibre bonnet.
7. Bonnet vent configuration.
8. Whether vents/mesh are included.
9. Whether hinges and gas struts are included.
10. Actual condition and finish.

Aston Martin uses multiple individual references for bonnet vents and related components, so confirming the complete bonnet reference is particularly important.

Short Description

• Aston Martin DBS Superleggera front hood / bonnet
• Designed for DBS Superleggera AM7
• 2018–2024 model application
• OEM-specification replacement body panel
• Suitable for accident and collision repair
• Ideal for Aston Martin restoration projects
• Designed around the DBS Superleggera bonnet profile
• Compatible bonnet vent configuration should be verified
• Carbon-fibre bonnet options exist for selected specifications
• Bonnet vents and mesh may be sold separately
• Hinges, gas struts and latch hardware may be separate
• Condition and finish should be confirmed from actual photographs
• Verify VIN and complete OEM part number before purchase
• Professional installation recommended