Rolls-Royce Wraith Dawn 21-Inch Front & Rear Alloy Wheels

Original Rolls-Royce Wraith Dawn 21-inch alloy wheels, available for the front and rear axles. The supplied specifications are 8.5J x 21 ET25 at the front and 9.5J x 21 ET33 at the rear. The front OEM reference is 6872931, while the supplied rear reference is 6972932. Similar current Wraith wheel listings confirm the 8.5Jx21 ET25 and 9.5Jx21 ET33 staggered specifications, with a 5×120 bolt pattern and 72.6 mm center bore.

Specifications

• Product: Rolls-Royce Alloy Wheels
• Models: Rolls-Royce Wraith / Dawn
• Wheel Diameter: 21 inches
• Front Part Number: 6872931
• Rear Part Number: 6972932
• Front Size: 8.5J x 21
• Front Offset: ET25
• Rear Size: 9.5J x 21
• Rear Offset: ET33
• Bolt Pattern: 5×120
• Center Bore: 72.6 mm
• Material: Aluminum Alloy
• Position: Front and Rear
• Condition: Original Used, as shown in pictures
• Fitment: Verify by VIN and wheel part number

The 8.5J x 21 ET25 front and 9.5J x 21 ET33 rear configuration is documented for Rolls-Royce Wraith wheels. (Allegro)

Compatibility

These Rolls-Royce 21-inch alloy wheels are intended for compatible Wraith and Dawn applications. The staggered front/rear configuration is particularly relevant when replacing individual damaged wheels or restoring an original wheel set.

Always compare the OEM part number, wheel dimensions, offset, bolt pattern, and center bore with the existing wheels before ordering. Vehicle equipment and wheel specifications can vary, so VIN verification is recommended.

Original Rolls-Royce Wheels

These original alloy wheels are suitable for customers looking to replace a damaged, scratched, bent, or missing factory wheel. For used wheels, the exact cosmetic condition should be assessed from the product photographs, as previous use may result in normal marks or signs of installation.

When replacing a single wheel, matching the existing wheel’s design and specifications is especially important to maintain the correct factory configuration.

Front Wheel – 6872931

The Rolls-Royce Wraith/Dawn front alloy wheel 6872931 features the supplied 8.5J x 21 ET25 specification. Current market listings also identify 6872931 as a Wraith front wheel with the same dimensions.

Rear Wheel – 6972932

The supplied rear wheel reference 6972932 is specified at 9.5J x 21 ET33. Buyers should verify the number stamped on the actual wheel before ordering, particularly when purchasing a single replacement wheel.

Installation and Fitment

Installation should be performed by a qualified tire or automotive professional. Before fitting, inspect each wheel for cracks, bends, corrosion, curb damage, or previous repairs.

Confirm that the correct tire size and wheel hardware are used for the specific Rolls-Royce application. For exact fitment confirmation, provide the vehicle VIN and existing wheel part number before purchase.